Hidden Brackets 125mm x 10mm

$9.25 incl GST

Cliff Hanger Hidden Brackets 125mm x 10mm diameter

SKU: CHBH10 Category:


  • The Hidden Brackets are mounted on the wall and the shelf inserted over the brackets.
  • Made from high quality stainless steel to ensure strength and durability.
  • Size: Wall backing plate 68mm x 14mm. Rod 120mm long X 10mm diameter. Total length including wall backing plate is 125mm
  • Suitable for timber 20mm to 60mm thick. Not suitable for timber less than 18mm thick.
  • Recommended for shelves less than 300mm deep
  • Attach directly to timber of masonry
  • In the shelf edge to be placed against the wall, carefully drill holes into the timber using a 10mm drill bit. Make sure the holes are correctly spaced to match the bracket positions on the wall.
  • Mount the brackets on the wall in the correct place to match the holes in the shelf. At least 2 brackets and no more than 500mm between brackets
  • For gib board or hollow walls, we recommend locating the brackets over wooden studs. We recommend the gib board is removed allowing the bracket to fit tightly onto the timber. This will help mitigate sagging.
  • Medium Duty Only. When properly installed, the load capacity can be up to 20kg per pair
  • Hollow wall anchors should be used if fitting to gib or hollow cavity walls available here. Minimum of 2 are required per bracket.
  • The load capacity of the bracket is only as strong as the strength of the wall sheeting and the depth of the shelf. The further the shelf extends out from the wall, the less load the shelf can sustain. A correctly installed bracket should have no movement between the wall and the bracket base plate when weight is applied to the rod.



There are no reviews yet.

Be the first to review “Hidden Brackets 125mm x 10mm”


Shopping cart


No products in the cart.